Dux 17ENB5L, Руководство пользователя

Страница: 13 / 32

Owner’s Guide
13
Operation (Using the optional Remote Controller)
1. The
Operation
button is ON.
(e.g. 40°C)
• The Operation indicator is displayed.
• The previously set hot water supply
temperature is shown.
2. Set the temperature using the
↑
/
↓
buttons.
NOTE • Check the temperature displayed
before using any hot water.
Be especially careful using hot
water after the set temperature
has been changed.
• For most residential applications,
the recommended setting
temperature is 50°C or less.
For applications that occasionally
require a higher temperature
setting, locate the remote
controller in a convenient location.
• While using hot water, the set
temperature can be lowered to
minimum of 37°C. For safety, it
cannot be raised above 43°C until
all hot water taps are closed. (For
some products)
3. Turn on hot water.
• Turn off hot water, the Burner on indicator
disappears.
Temperature Setting Options
The temperature settings below are examples. The
temperature setting necessary depends on the
usage, the length of piping and the season.
(Default setting is 40°C)
37°C Washing dishes,
etc.
(Bathroom and
Bathroom 2 controller
are these ranges.
[50 degree models:
Main and Bathroom
and Bathroom 2
controller are these
ranges.])
38°C
39°C
Shower, hot
water supply, etc.
40°C
41°C
42°C
43°C
44°C
Hot water supply,
etc.
45°C
46°C
47°C
48°C
50°C
55°C
High temperature*
2
60°C
70°C *
1
*1 26ENG series only
*2 Display when high temperature is set
(e.g. 60°C)
Flashing
for 10 seconds
NOTE
If the set temperature requires
frequent adjustment, locate the
Remote Controller in an easily
accessible location.
Priority indicator is displayed.
Burner on indicator is displayed
during combustion.