Duux Threesixty, Руководство пользователя

Страница: 9 / 16

3. Installation
CAUTION: Carefully read the safety instructions
(Chapter 2) and the installation and operation
instructions below before using the product.
NOTICE: Remove all the packaging material before
assembling or using the product. Leaving packaging
material on the product may cause melting of the
packaging material and sticking to the product.
1.
Position the heater on a hard flat surface at least
50 cm away from the wall or any other objects.
2.
Insert the power plug in the power outlet
The product makes a beep sound.
All the icons light up for ±3 seconds and the Wi-Fi
icon starts flashing afterwards.
The product is now in standby mode.
4. Functions
Buttons
Power
Press the
button to turn on the appliance. The
heater will turn on and the LED indicator for heat
level I will illuminate.
Press the
button again to switch off the appliance.
After switching off the heater, the fan will remain
on for ± 30 seconds to cool the heating element
down. The fan speed Boost and standby status LED
indicators will show a cool down sequence. After this,
the appliance automatically returns to standby mode.
Heating
Pressing the button will cycle through the
different heat levels.
Press the button to increase the heat to
level II. The fan speed automatically increases to
Boost to prevent overheating of the product. The
corresponding LED indicator will illuminate.
Press the button again to activate the highest
heat setting. The heat level III LED indicator will
illuminate and the fan will remain in Boost.
Press the button one more time to decrease the
heat to level I. The fan speed will automatically switch
to Eco.
NOTE: When Heat level II or III are active, the fan
speed is always in Boost to prevent overheating of
the product.
EN