11
10
3. Functions
4. Maintenance
Note:
see product overview (chapter 1) for
reference.
1
Top cover
The cover is designed to efficiently spread the
ultrasonic mist. Please always leave this cover
on during use. To remove the cover, please put
your finger behind the outside of the ring and
lift it upwards.
2
Max. water supply indicator
Always fill the water tank up to this line. Do NOT
exceed this line as it may cause malfunction or
breakdown.
3
LED ring
The LED ring provides a soft glow and is the
perfect finishing touch to your relaxation ritual.
The LED ring can be controlled with the control
panel (see 7).
4
Power input
Please directly connect the adapter to the
device and to a power socket on the wall.
5
Air intake
The air intake ensures constant air flow
throughout the device.
Attention:
Regularly check that the air intake
is not obstructed by hair or dust.
6
Mist outlet
The ultrasonic mist is released through the mist
outlet
Note:
Do NOT fill the water tank through the mist
outlet as this may cause malfunction or breakdown.
Always remove the top cover to fill the water tank.
7
Control panel
Use the control panel to adjust the settings.
• Press 1 – Turn on the device. Default mist output
setting is “I”;
• Press 2 – Switch between low and high mist
output;
• Press 3 – Turn off the device.
• Press 1 – Turn on the LED ring;
• Press 1 – Turn off the LED ring.
Note:
If LED ring flashes blue when the power is
connected, there is insufficient water. Please supply
water (see chapter 2) via the top of the device.
8
Water entrance
Water is supplied through this entrance. See
chapter 2 for water filling instruction.
Important:
Be sure to remove the power adapter
from the outlet before carrying out maintenance.
Important:
Do not soak immerse the power
adapter or the device in water.
Important:
We recommend daily maintenance
to prevent the growth of bacteria and scale inside
the water tank.
Please replace the water in the water tank with
fresh tap water every day. Dirt in the water or scale
can trigger the growth of bacteria or mould, leading
to bad odour or damage to health.
Please follow the steps below every day after use:
1
Switch the power button to OFF and remove
the power adapter;
2
Remove the top cover from device.
Note:
To remove the top cover, please put your
finger behind the outside of the ring and lift it
upwards.
3
Drain the water remaining in the water tank.
Attention:
Please dispose water from the
FRONT side of the device.
Daily maintanance
Iconic-Aroma-Diffuser Handleiding.indd 10-11
12-01-17 15:11
