DUSTLESS BLASTING DB500 MOBILE XL, Руководство пользователя

Страница: 27 / 34

19
MEDIA BUILD UP INSIDE POT - ADJUSTING VIBRATOR VALVE
On the left side of your control box, a small brass petcock valve controls the vibrator speed. This vibrator valve must be
open during blasting. Adjust it so that you feel maximum vibration at the head of the machine. This will insure that all of
the media gets “shaken” to the bottom of the tank.
Over time, you could experience abrasive buildup inside the pot which actually changes the harmonics of the pot. If the
system is not feeding right, adjust the valve, allowing the pot to rattle more.
ABRASIVE NOT FLOWING CORRECTLY
• Ensure proper Installation, air pressure, and abrasive.
• Check media quality. Your machine is made to run with clean, high quality abrasive or media.
NOTHING IS COMING OUT OF THE NOZZLE
The blast nozzle may become clogged with debris or blast media. If this occurs, shut down the machine, then remove
the nozzle and inspect for a rock or other foreign material.
PINCH VALVE MALFUNCTIONING
1. Put the machine in the blowdown position.
2. Does the pressure gauge on the bottom left side of the control box read 90?
3. Are all fittings tightly secured to the deadman and the back of the box?
4. Test the solenoid valve inside the control box
Troubleshooting
Please call the manufacturer directly with any additional maintenance questions.
1-800-727-5707 | support@dustlessblasting.com
YOUR SAFETY IS IMPORTANT TO US. ALWAYS WEAR APPROPRIATE PROTECTIVE EQUIPMENT WHILE MAINTAINING OR OPERATING
BLASTING EQUIPMENT. BE AWARE OF YOUR SURROUNDINGS. NEVER ATTEMPT MAINTENANCE ON PRESSURIZED EQUIPMENT.
DO NOT SHAKE THE BLAST
POT TO LOOSEN MEDIA.
NEVER OPERATE WITHOUT A
NOZZLE.
NEVER OPERATE WITH
A DAMAGED OR MISSING
PINCH HOSE.