background image

16

7. Periods Of Inactivity

If the machine is not used for some time, remove the squeegee, brushes/microfibre disks and drive disks, wash 
them and put them away in a dry place (preferably in a bag or wrapped in plastic film) away from dust. Park the 
machine with the parking brake on.
Make sure the tanks are completely empty and perfectly clean.
Disconnect the machine from the power supply.
Completely recharge the batteries before storing them. During long periods of inactivity, you should charge 
the batteries regularly (at least once every two months) to keep them constantly at maximum charge.

Important

If you do not charge the batteries regularly, they may be irrevocably damaged.

8. Battery Maintenance And Charging

Do not check the battery by sparking.

The batteries give off flammable fumes. Put out all fires and hot embers before checking  

or topping up the batteries. 

Perform the operations described above in a ventilated room.

Danger

To avoid permanent damage to the batteries, do not run them down completely.
Remember that when the corresponding red LED flashes on the control panel, you must charge the batteries.

8.1. Recharging procedure

Содержание Hurricane Scooter Ride-On


























Отзывы: