Dustbane Hurricane Scooter Ride-On, Руководство по эксплуатации, Страница: 14 / 25

12
Before starting work, proceed as follows:
• check the battery charge (recharge if necessary);
• make sure the recovery tank is empty. If necessary, empty it;
• via the opening at the front, fill the solution tank with a suitable concentration of clean water and
low-foam solution. Leave at least 5 cm between the surface of the liquid and the opening of the tank;
• make sure the squeegee is firmly attached and connected to the suction hose. Make sure the back
blade is not worn;
• adjust the height of the control panel support by pressing the locking lever (ref; 1) and with the other
hand raise the mount support. When the device has been released, raise or lower the support into the
desired position.
If you are using the machine for the first time, we recommend trying it on a large obstacle-
free surface first to acquire the necessary familiarity.
Always empty the recovery tank before filling the solution tank again.
Information
For effective cleaning and to extend the working life of the machine, follow a few simple rules:
• prepare the work area by removing all possible obstacles;
• begin working from the furthermost point to avoid walking on the area you have just cleaned;
• choose the straightest possible working routes;
• divide large floors into parallel rectangular sections.
• if necessary, finish off by passing a mop or rag rapidly over parts inaccessible to the automatic
scrubber.
6.6. Working
1. Start the machine by turning the key clockwise.
2. Press the suction button (LED on) to lower the squeegee and enable the suction motor.
3. Press the brush button (LED on) to lower the head.