9
ENGLISH
ENGLISH
9
Alternatively, the machine can be sent to the Manufacturer for a thorough overhaul.
If the machine is not used anymore, it is recommended that batteries are removed and
deposited at an authorized collecting centre.
Moreover, it is recommended that you make harmless those parts of the machine that
could be dangerous especially to children, who could use the machine for their games.
5.
HANDLING AND INSTALLATION
5.1
Lifting and carrying the packed machine
WARNING
In all lifting operations make sure that the packed machine has been tightly
anchored to the pallet, in order to avoid any overturning or accidental falls.
Loading and/or unloading from the motor vehicles must be performed in an
adequately lighted environment.
The machine, which is packed on a wooden pallet by the Manufacturer, must be loaded
by means of proper handling machines (refer to the EEC provision 89/392/CEE and
following amendments), onto the carrier and, once it has arrived at the appointed
destination, unloaded by similar means.
The brushes and the squeegees are packed in cardboard boxes without pallet.
The packed machine body must be lifted only with a fork lift truck. Handle with care to
avoid bumps or overturnings.
5.2
Checking the machine on delivery
On delivery check with attention that the package and the machine are not damaged. In
the event that the machine has suffered any damages, report so to the carrier; before
accepting the goods, reserve by written the right to present a claim for the refund of the
damages.
5.3 Unpacking
WARNING
On unpacking the machine, the operator must be provided with the necessary
accessories (e.g. gloves, protective goggles etc.) to limit possible hazards of
accidents.
Unpack the machine in the following way:
• cut and remove the plastic straps with scissors o
r nippers;
• remove the cardbox;
• remove the envelopes inside the battery compartme
nt (within the solution tank) and
check its contents:
envelope 1: - test sheet;
- warranty coupon;
- user’s and maintenance manual;
envelope 2: - 3 battery bridge with clips;
- 1 pair of tweezers for fuses;
- 1 connector for the battery-charger;
- 2 switch keys;
i INFORMATION
Keep one of the 2 keys safe so that it can be located in case the other one is lost;
the other key is to be inserted in the lock on the mushroom switch.
• depending on the model, remove the metal brackets
or cut the plastic straps, which fix
the machine chassis to the pallet;
Содержание Hurricane 850 XTT
