Durr EcoGun 910, Руководство по эксплуатации

Страница: 18 / 32

8. Pull out the needle (2) towards the back.
Dismantling the nozzle
Fig. 14: Dismantling the nozzle
9. Loosen the cap nut (2).
10. Pull off air cap (1).
11. Loosen nozzle (3) using a hexagonal
box wrench (13 mm) and remove it.
Installing the nozzle
12. Screw-in new nozzle (3) and tighten it.
Tightening torque: 18–20 Nm
13. Assemble and align the air cap Ä 6.4
“Changing the air cap”.
Inserting the needle
Fig. 15: Inserting the needle
14. Insert the needle (1).
15. Position compression spring (2).
16. Press stop screw (5) against the com-
pression spring into the body of the
spray gun. One of the nibs (6) of the clip
(3) must be in the 11 o’clock position.
17. Turn stop screw (5) clockwise until fas-
tened.
ð Stop screw (5) is pushed back into its
initial position.
18. Set the material flow Ä 5 “Commis-
sioning”.
Faults
05/2018 EcoGun 910 - MSG00003EN 18/32