4
• The operator must be knowledgeable in the
operation of the appliance.
• The product is not designed to be used in
medical treatment areas where there exists
the danger of explosion. Areas where
explosions could occur are those where
flammable anesthetic material, skin
cleansers, oxygen and skin disinfectants
are present. This appliance is not to be
used in any areas where the atmosphere
could cause fire.
1.5 Combining Appliances
• Units may only be connected to the system
or to other units when it has been
established that there is no reduction of
safety for the patient, the operator or the
environment through such connection.
Where it is not absolutely clear from the
documentation whether the safety is
reduced by such connection, then the
operator must establish, e.g. by contacting
either the manufacturer or an expert, that
there is no danger to the patient, the
operator or the environment through such
connection.
1.6 Electrical Safety Notes
• This regeneration unit may only be used
with a correctly fitted standard earthed
plug and socket.
• Before connecting the appliance to the
power supply check that the current
required and the frequency is the same as
that provided at the power outlet.
• No extension cables should be used to
connect the machine to the power outlet.
• Warning! Check the appliance and the
power supply cables for correct installation
and possible damage before switching on.
Damaged cables, plugs and sockets must
be replaced before use.
• The appliance should not be used in the
patient’s vicinity. A minimum distance to
patient of 1.5 meters is recommended.
1.7 Warnings and Symbols
In the Installation and Operating Instructions
use is made of the following terms or
symbols to denote information of special
importance:
Information, requirements and
prohibitions on preventing
personal injury and extensive
damage to propert.
Special information concerning the
economical use of the appliance and
other instructions.
Observe Installation and Operating
Instructions
CE-Labeling
Power on/off
/
Select program
Confirm selection
2. Product information
2.1 Correct Usage
The DÜRR Regeneration Unit is designed
solely for use with DÜRR DENTAL X-ray
developer units of the model series XR .. .
Precise observance of the installation and
operating instructions is a pre-condition for
use of the unit for the intended purpose and
for its correct installation, operation and
maintenance.
2.2 Incorrect usage
Any other use or use beyond what is
specified is deemed to be not for the
intended purpose. The manufacturer
accepts no liability for damage resulting
therefrom. All risk is borne solely by the user.
