background image

WARNING: 

This generator may emit highly flammable and explosive gasoline vapors, 

which can cause severe burns or even death. A nearby open flame can lead to an 

explosion even if not directly in contact with gas.
 

 

Do not operate near an open flame. 

 

Do not smoke near generator. 

 

Always operate on a firm, level surface. 

 

Always turn generator off before refueling. 

 

Allow generator to cool for at least 2 minutes before removing fuel cap. Loosen cap 
slowly to relieve pressure in tank. 

 

Do not overfill gas tank. Gas may expand during operation. Do not fill to the top of 

the tank. 

 

Always check for spilled gas before operating. 

 

Empty the gasoline tank before storing or transporting the generator. 

 

Before transporting, turn fuel valve to the off position and disconnect the spark plug.

WARNING:

 This generator produces a powerful voltage, which can result in electrocution.

 

 

ALWAYS ground the generator before using it (see the “Grounding the Generator” 
portion of the “PREPARlNG THE GENERATOR FOR USE section). 

 

Generator should only be plugged into electrical devices, either directly or with an 

extension cord. NEVER connect to a building electrical system without a qualified 

electrician. Such connections must comply with local electrical laws and codes. Failure 

to comply can create a backflow of power, which may result in serious injury or death 

to utility workers. 

 

Use a ground fault circuit interrupter (GFCI) in highly conductive areas such as metal 
decking or steel work. GFCls are available in-line with some extension cords. 

 

Do not use uncovered in rainy or wet conditions. 

 

Do not touch bare wires or receptacles (outlets). 

 

Do not allow children or non-qualified persons to operate.

GENERAL SAFETY PROCEDURES

In addition to the above safety notices, please familiarize yourself with the safety and 

hazard markings on the generator.

GENERAL SAFETY PROCEDURES

9

8

Содержание XP4850EH-081418




































Отзывы: