DUROMAX XP10000EH, Руководство пользователя

Страница: 8 / 28

Change the Voltage Selector Switch after turning the AC circuit breaker to OFF. The generator may
Ground Terminal
The generator ground terminal is connected to the frame of the generator, the metal
non-current-carrying parts of the generator, and the ground terminals of each receptacle.
DC Receptacle
The DC receptacle may ONLY be used for charging 12 volt automotive type batteries
.
The battery must be connected to the generator DC receptacle with the proper polarity (battery
positive to generator positive (+) and battery negative to the generator negative (-).
Do not start the vehicle while the battery charging cable is connected and the generator is running.
The vehicle or the generator may be damaged.
DC Circuit Protector
The DC circuit protector automatically shuts off the DC battery charging circuit when the DC
charging circuit is overloaded, when there is a problem with the battery, or when the connections
between the battery and the generator are improper.
Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by an insufficient amount of oil in
the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert system
will automatically stop the engine (the engine switch will remain in the ON position). The Oil Alert
system should not take the place of checking the oil level before each use.
If the engine stops and will not restart, check the engine oil level before troubleshooting in other areas
.
AC Circuit Breaker
The AC circuit breaker will automatically switch OFF if there is a short circuit or a significant
overload of the generator at the receptacle. If the AC circuit breaker is switched OFF automatically,
check that the appliance is working properly and does not exceed the rated load capacity of the circuit
before switching the AC circuit breaker ON again. The AC circuit breaker may be used to switch the
generator power ON or OFF.
AC Circuit Protector
The AC circuit protectors will automatically switch OFF if there is a short circuit or a
significant overload of the generator at the 20A 120V, 30A 120V plug. If an AC circuit
protector switches OFF automatically, check that the appliance is working properly and
does not exceed the rated load capacity of the circuit before resetting the AC circuit
protector ON.
be damaged if the Voltage Selector Switch is changed with the breaker in the ON position.
Page 8 of 29