Push the choke to the OPEN position as the engine warms up.
3 The choke will need to be closed, pull the choke rod out to the CLOSED position.
3 Turn the fuel valve lever to the OFF position.
2
Turn the engine switch to the OFF position.
1 Turn the AC circuit breaker to the OFF position. Disconnect DC battery charging cables.
In normal use:
To stop the engine in an emergency, move the engine switch to the OFF position.
When the engine starts, allow the engine switch to return to the ON position
.
be recharged
.
If the speed of the starter motor drops after a period of time, it is an indication that the battery should
release the switch and wait 10 seconds before operating the starter again
.
Operating the starter motor for more than 5 seconds can damage the motor. If the engine fails to start
,
engine starts.
2 Turn the fuel valve lever to the ON position.
start if a load is connected.
1
Make sure that the AC circuit breaker is in the OFF position. The generator may be hard to
4
Turn the engine switch to the START position and hold it there for 5 seconds or until the
In an emergency:
Stopping the Engine
Page 13 of 29
Содержание XP10000EH
