manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP8500EH, Руководство пользователя

Поделиться
Скачать
DUROMAX DUAL FUEL HYBRID ELITE XP8500EH Скачать руководство пользователя страница 54

MAINTENANCE AND CARE (CONTINUED)

Checking the oil

54

Check the oil

The generator is equipped with an automatic shutoff to 

protect it from damage due to low oil. Nonetheless, you 

should check the oil level of the engine before each use to 

ensure that the engine crankcase has a sufficient amount.

To check the oil level:

a. 

Make sure the generator is on a level surface.

b. 

Unscrew the oil filler/dipstick cap.

c. 

With a dry cloth, wipe the oil off of the stick on the 

 

 

inside of the cap.

d. 

Insert the dipstick as if you were replacing the  

 

cap and then remove it again. There should now be  

 

oil on the stick. If there is no oil on the stick, or oil  

 

only at the very end of the stick, you should add  

 

oil until the engine crankcase is filled (see “Adding 

 

 

Oil” portion of the “Maintenance” section).

e. 

The oil will be visible in the oil fill spout when full.

f. 

Be sure to replace the cap when finished checking 

 

 oil.

Model Number

XP8500EH

Engine Oil Capacity

37 fl. oz (1.1L)

Содержание DUAL FUEL HYBRID ELITE XP8500EH

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды