manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP8500EH, Руководство пользователя

Поделиться
Скачать
DUROMAX DUAL FUEL HYBRID ELITE XP8500EH Скачать руководство пользователя страница 21

4. Fuel Cap

15.  Fuel Filter Cup

18.  Muffler

17.  Spark Plug

3. Fuel Gauge 

12. 

Oil Fill and Dipstick

 - Use to add or check the oil.

13. 

Engine Switch

 – 3 Position Switch to “Start”, “Run”, or turn “Off” the generator.

14. 

Recoil Start

 – Easy Pull Recoil Start to start the engine without the electric start.

15. 

Fuel Filter Cup

 - Traps dirt and debris in gasoline before it enters the engine.

16. 

Fuel Valve

 - On/Off Valve that allows gasoline into the engine.

17. 

Spark plug

 – Provides ignition to the engine.

18. 

Muffler

 – Reduces engine emissions and reduces noise.

19. 

Power Boost

 – DuroMax exclusive Power Boost doubles the amperage available in “120v Only” 

for heavy loads like RV air conditioners.

20. 

5v USB 

- Dual USB output for charging electronics.

21. 

Propane Inlet

 - Attach the included propane hose and regualtor to use the generator on 

propane gas.

22. 

Idle Control

 - Lowers the RPM of the generator when no load is present to save fuel and lower 

noise.

21

Содержание DUAL FUEL HYBRID ELITE XP8500EH

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды