DUROFIX RK60132 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 20

DUROFIX RK60132 Скачать руководство пользователя страница 19

1

English

1

English

-19

When change the position of the control button, making sure the variable

speed switch is released.

The first time the tool is run after changing the direction of rotation, you

may hear a click on start up. This is normal and does not indicate a problem.

MAINTENANCE

Remove the battery pack from this tool before cleaning solutions.

This tool is lubricated before it leaves the factory. This lubrication

should last for the life of the tool. No further lubrication is required.

CLEANING

With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned with a damp cloth and mild detergent. Although these parts are highly are
solvent resistant, NEVER use solvent.

CHARGER CLEANING INSTRUCTIONS

Dirt and grease may be removed from the exterior of the charger using a cloth or soft
non-metallic brush. DO NOT use water or any cleaning solutions.

WARNING!!:

Disconnect the charger from the AC outlet before performing any

cleaning of the charger.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.

IMPORTANT:

To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.

PROTECTING THE ENVIRONMENT

NOTE

NOTE

WARNING

NOTE

«
...
17
18
19
20
»

Содержание RK60132





















Отзывы:

Нет отзывов