DUROFIX RK60132 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 20

DUROFIX RK60132 Скачать руководство пользователя страница 16

1

English

1

English

-16

TO REMOVE BATTERY PACK: Depress the battery pack release button (7) and pull
the battery pack (8) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (8) onto tool until it locks in
place.

INSERTING AND REMOVING A DRILL BIT

Your tool features a keyless chuck for greater convenience. To insert a drill bit or other
accessory, follow the following steps listed below.
1. Lock the trigger switch in the off position.
2. Grasp the rear half of the chuck with one hand and use your other hand to rotate the
front half counterclockwise. Rotate far enough so that the chuck opens sufficiently to
accept the desired accessory.
3. Insert the bit or other accessory into the chuck and tighten securely by holding the
rear half of the chuck and rotating the front portion in the clockwise direction.
To release the accessory, repeat step 2 listed above.

1. Do not attempt to tighten drill bits (or any other accessory)
by gripping the front part of the chuck and turning the tool on.

Damage to the chuck and personal injury may result. Always lock off trigger switch
when changing accessories.
2. Be sure to tighten chuck with two hands on both the rear sleeve and the forward
sleeve for maximum tightness.

INSTALLING OR REMOVING THE SIDE HANDLE

When installing the side handle, follow the sequence of operation below, and pass the
side handle through the part A (no thread) and the part B (threaded) and rotate it
clockwise to clamp it to the side handle base (C part) until it is firm , Reverse operation
when removing the side handle.

When assembling, the side handles can be assembled to the left or right for assembly,
so that they can be held during operation.

C

B

B(具螺紋)

扭緊

鬆開

A(無螺紋)

INSTALLING OR REMOVING THE DEPTH SCALE

CAUTION

«
...
14
15
16
17
18
...
»

Содержание RK60132





















Отзывы:

Нет отзывов