1
English
1
English
-
16
MAINTENANCE
Remove the battery pack from this tool before cleaning solutions.
This tool is lubricated before it leaves the factory. This lubrication
should last for the life of the tool. No further lubrication is required.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly solvent
resistant, NEVER use solvent.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
PROTECTING THE ENVIRONMENT
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool, charger and battery or return them to a certified service center for
recycling .
For technical support, call: 886-4-25683366
Service address: Mobiletron Electronics Co., Ltd.
No. 85, Sec. 4, Chung-Ching Rd.
Ta-Ya, Taichung, 428,Taiwan
www.durofix.com.tw
WARNING
NOTE