manualshive.com logo in svg

Duro 6200 SXT, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Duro 6200 SXT Скачать руководство пользователя страница 21

21

User Programming Mode Steps

Note: 

Use 

 and 

 Down button to adjust values for 

parameters.

1.  Press the 

 and 

 buttons for five seconds while in 

service, and the time of day is NOT set to 12:01 PM.

2.  Use this display to adjust the 

Day Override. Adjust this to “12” 
parameter for softeners.

3.  Press the 

 button. Use this 

display to adjust the Regeneration 
Time.

4.  Press the 

 button. Use this 

display to set the Current Day of 
the Week. This option setting is 
identified by “CD” in the upper 
left hand corner of the screen. This 
option is only available after the Day of the Week control 
is set to ‘ON’ in the Master Programming. Refer to the 
valve manual for details.

5. Press the 

 button to end User Programming Mode.

Programming Instructions

Set Time of Day

Press and hold        or        buttons until display reads TD.

Adjust the displayed time with        or        buttons. Press        to resume normal operation.

Queuing a Regeneration

1.  Press the        button. The service icon           will flash to indicate that a regeneration is queued.

2.  To cancel a queued regeneration, press the        button.

Regenerating Immediately

Press and hold the        button for five seconds.

User Programming Mode Options

Abbreviation

Parameter

Description

DO

Day Override

The timer’s day override setting

THIS IS An OPTIOn OnLY. PLeASe DO nOT ADjUST BeFORe COnSULTIng An AUTHORIzeD DeALeR.

RT

Regeneration Time

The time of day that the system will regenerate (meter delayed, timeclock, and day-of-week systems)

CD

Current Day

The current day of week

OFF

OFF

OFF

In the second level mode, the control valve has been pro-
grammed as per the following main parameters related to 
regeneration. For more information on master programming 
manual, read control valve manual part # 54802.

The valve has been pre-programmed with factory settings 
as shown in the following chart:

20

Regeneration Cycle Step Programming

1. Backwash 

6 minutes

2. Rapid Rinse 

4 minutes

Содержание 6200 SXT











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды