Dürkopp Adler D669, Руководство по эксплуатации

Страница: 89 / 226

Programming
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020 87
Setting options
Max. sewing speed
5.6.3.4 Setting the Outputs (
Output
) parameter
This parameter provides virtual outputs that can be assigned
customer-specific functions. They can be used when customer-
specific applications require a signal from the control of the
machine.
This parameter cannot be used unless the virtual outputs have
been assigned to a physical output at the Technician level.
This requires that the parameter
Additional I/O
Configuration
can be configured at the Technician level;
for more details, refer to the explanation in the

Service
Instructions .
Menu item Setting 1 Setting 2
linear Max.
Sewing speed
Value range 0000 – 4000
Maximum speed reached
at the upper material
thickness limit.
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness at which
the increase in sewing
speed should start.
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
Material thickness up to
which the increase in
sewing speed should occur.