manualshive.com logo in svg

Dürkopp Adler D669, Руководство по эксплуатации

Поделиться
Скачать
Dürkopp Adler D669 Скачать руководство пользователя страница 18

Machine description

16

Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020

3.2

Proper use

The machine may only be used with sewing material that satisfies 
the requirements of the specific application at hand.

The machine is intended only for use with dry sewing material. 
The sewing material must not contain any hard objects.

The needle thicknesses permissible for the machine are listed in 
the 

Technical data

(

p. 201

) chapter.

The seam must be completed with a thread that satisfies the 
requirements of the specific application at hand.

The machine is intended for industrial use.

The machine may only be set up and operated in dry conditions 
on well-maintained premises. If the machine is operated on 
premises that are not dry and well-maintained, then further 
measures may be required which must be compatible with 
DIN EN 60204-31.

Only authorized persons may work on the machine.

Dürkopp Adler cannot be held liable for damages resulting from 
improper use.

WARNING

Risk of injury from live, moving and cutting 
parts as well as from sharp parts!

Improper use can result in electric shock, 
crushing, cutting and punctures.

Follow all instructions provided.

NOTICE

Non-observance will lead to property damage!

Improper use can result in material damage at the machine.

Follow all instructions provided.

Содержание D669



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды