Dürkopp Adler 884-xxx-M series, Инструкция по эксплуатации

Страница: 19 / 40

3. Top feed
3.1 Position of the needle holder with single needle sewing machines
Rule:
The position of the needle holder is to be set according to the picture.
Angular position of
the needle holder
Needle thickness/Nm 70 - 110
–
Remove the thread guide (1).
–
Loosen screw (2) and turn the needle bar with the right groove
edge (3) to the needle bar axis (in sewing direction) and tighten
screw (2).
–
Bring the needle bar to the upper dead center and loosen the
screw of the needle holder through the bore (4) by using an Allen
key of 2.5 mm (5).
–
Turn the needle holder (6) according to the rule and tighten the
screw.
17
EN
1 2
5
4
6
3