Dürkopp Adler 868-M, Руководство по эксплуатации

Страница: 85 / 168

Operation
Operating Instructions 868-M - 01.0 - 12/2020 83
4.20.2 Sewing with the machine
The following is an example of how to sew with one of the machines.
To complete the operating steps listed below, a CLASSIC machine
must possess the following features:
• 1-needle machine
• Thread cutter
• electropneumatic seam bar tacking and sewing foot lift
• electropneumatic quick stroke adjustment
The following functions have been set at the control panel:
The last sewing process is completed with an end bartack and by
cutting off the thread.
To sew with the machine:
Preparing to sew
1. Switch on the machine (

p. 20 ).

The needle is up, and the sewing feet are down. The pedal
is in position
0 . The machine is ready for operation.
2. Press the pedal back to position -1 .

Lift the sewing feet.
3. Place the sewing material at the appropriate position above
the throat plate.
Function Setting
Start bartack: ON
End bartack: ON
Sewing foot
position before
and after cutting:
DOWN
Needle position
before cutting:
DOWN (pedal in 1
st
position = pedal in position 0 )
Needle position
after cutting:
UP (pedal in 2
nd
position = pedal in position -2 )