Dürkopp Adler 567 CLASSIC, Руководство по обслуживанию

Страница: 41 / 80

Position of the hook and needle
Service manual 567 classic - 01.0 - 10/2015 39
Fig. 29: Setting the loop stroke position
Setting steps
1. Lock the machine in place at position 1 (

page 16).
2. Position the stitch length adjusting wheel to 0.
3. Loosen all four setscrews (2) for the hook clamping ring (1).
4. Turn the hook such that the hook tip (4) points exactly to the vertical
center line of the needle (3).
5. Tighten the setscrews (2) for the clamping ring (1).
6. Remove the lock (

page 17) .
Order
Then check the following settings:
• Position of the needle guard (

11.3 Adjusting the needle guard ,
page 40)
• Timing of cutting by the thread cutter (

16.4 Adjusting the needle
thread tension , page 61)
(1) - Clamping ring
(2) - Setscrews (3) - Needle groove
(4) - Hook tip
①
③
④
②