DURKOPP ADLER 745-35-10 D Скачать руководство пользователя страница 16

Страница: 16 / 338

Machine head

Service Instructions 745-35-10 D - 00.0 - 10/2017

3.3

Swiveling up the machine head

The machine head can be swiveled up for maintenance work. This requires
that the transport carriage be in its rear position.

Fig. 2: Swiveling up the machine head (1)

To swivel up the machine head:

Remove the hood (1).
To do so, lift the hood (1) up at the front to release the lock. Carefully life
the hood (1) up and off.

Pull the handle of the folding station up.

Swivel the folding station out by 90°.

Swivel the locking lever (3) up.

WARNING

Risk of injury from moving parts!

Crushing possible.

Do not reach into the tabletop cutout when the
machine head is swiveled up.

(1)

- Hood

(2)

- Head cover

(3)

- Locking lever

①

②

③

Содержание 745-35-10 D



















































































































































































































































































































































Результаты поиска

Содержание 745-35-10 D

Отзывы:

Бренды по названию

Популярные бренды

DURKOPP ADLER 745-35-10 D, Инструкция по эксплуатации

Результаты поиска

Содержание 745-35-10 D

Отзывы:

Бренды по названию

Популярные бренды