DURKOPP ADLER 540-100-1, Руководство полное

Страница: 152 / 234

P6.1/ P7.1 A cross tack(horizontal) , F Cross tack (divided)
Tack stitch distance
P 6.2/ P 7.2 0.2 ... 1.0 mm Distance in the y-axis of a double stitch.
Tack length
P 6.3/ P 7.3 0.6 ... 6.0 mm Length of the tack in the y-axis. The input of
parameter P7.3 is only possible when the top
and bottom tack types are not similar!
Tack width
Right offset
P 6.4/ P 7.4 -1.0 … 1.0 mm The width of the tack is defined through the
buttonhole width. With the use of the right
offset the width of the tack to the right can be
increased.
Tack width
Left offset
P 6.5/ P 7.5 -1.0 … 1.0 mm The width of the tack is defined through the
buttonhole width. With the use of the left offset
the width of the tack to the left can be
increased.
Tack tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
P6.1/ P7.1 B Round tack (to the middle point)
Tack stitch number
P 6.6/ P 7.6 2 … 50 Number of stitches, that form the semicircular
tack.
Tacking tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
P6.1/ P7.1 C Taper tack
Tack stitch distance
P 6.2/ P 7.2 0.2 … 1.0 mm Distance in the y-axis of a double stitch
Tack length
P 6.3/ P 7.3 0.6 … 9.0 mm Length of the tack in the y-axis
Tack tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
P6.1/ P7.1 D Round tack (horizontal)
Tack stitch distance
P 6.6/ P 7.6 0.3 … 1.0 mm Distance in the y-axis of a double stitch
Tack tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
34