DURKOPP ADLER 512/532 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 100

DURKOPP ADLER 512/532 Скачать руководство пользователя страница 10

About these instructions

8

Operating Instructions 512/532 - 05.0 - 04/2018

1.4

Liability

All information and notes in these instructions have been compiled
in accordance with the latest technology and the applicable stan-
dards and regulations.

Dürkopp Adler cannot be held liable for any damage resulting
from:

• Breakage and damage during transport

• Failure to observe these instructions

• Improper use

• Unauthorized modifications to the machine

• Use of untrained personnel

• Use of unapproved parts

Transport

Dürkopp Adler cannot be held liable for breakage and transport
damages. Inspect the delivery immediately upon receiving it.
Report any damage to the last transport manager. This also
applies if the packaging is not damaged.

Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.

Report all other complaints to Dürkopp Adler immediately after
receiving the product.

«
...
8
9
10
11
12
...
»

Содержание 512/532





































































































Отзывы:

Нет отзывов