DURKOPP ADLER 512-211-01, Инструкция по эксплуатации

Страница: 55 / 82

Settings via software
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 53
E 5 1 2 USB read error Data cannot be loaded
from USB stick
Check USB stick.
Reinsert USB stick.
E 5 1 3 USB write error Data cannot be copied to
USB stick.
Check USB stick.
Reinsert USB stick.
E 5 5 0 Data write error Flash memory transfer
error
Set main switch to OFF.
Repeat process.
Replace the mainboard.
E 5 5 1 Internal process
error Software error Set main switch to OFF.
Repeat process.
Replace the mainboard.
Update software.
E 7
7 0
3 7
5 Motor signal
error Encoder / motor has no
signal Check motor / encoder.
E 7 3 6 Motor rotation
error Motor stops after some
time / encoder has no sig-
nal Check motor / encoder.
E 7 3 7 Error Z phase Z signal no longer changes Check motor / encoder.
E 7 3 8 Error Z phase Z signal inaccurate /
encoder has no signal Check motor / encoder.
E 9 0 7 Error search X-
axis X-axis sensor does not res-
pond Set main switch to OFF.
Check sensor.
E 9 0 8 Error search Y-
axis Y-axis sensor does not res-
pond Set main switch to OFF.
Check sensor.
E 9 1 0 Error clamp foot
search Clamp foot sensor does not
respond Set main switch to OFF.
Check sensor.
E 9 1 1 Error clamp foot
motor Clamp foot motor does not
operate correctly Set main switch to OFF.
Check motor and
connection.
E 9 1 2 Internal error - Notify DA Service
E 9 1 3 Error thread
catcher search Thread catcher sensor
does not respond Set main switch to OFF.
Check sensor.
E 9 1 4 Error thread
catcher motor Thread catcher motor does
not operate correctly Set main switch to OFF.
Check motor and
connection.
Error Description Possible cause Remedy