MAL_Vero_VE6414/15.04.1
16
17
18
19
For wood stud walls, bolts should
be screwed into wood backing.
When mounting the washbasin
into a wood stud wall, there
must be adequate bracing.
We recommend doubling up
2 x 6’s or 2 x 8’s between
the studs to form a solid
anchoring point.
Screw mounting bolts into the
pre drilled holes with an
adjustable wrench.
Screw in the full length of the
mounting bolt, so that the lag
thread is no longer visible.
Carefully slide washbasin onto
the mounting bolts. Insert
the white plastic sleeve over
bolt and into the hole in the
washbasin.
Install provided washer and nut.
Hand tighten the nut, so the
washbasin is secure.
Install the siphon.
Close the drawer.
Pull the drawer out.
20
21
22
23
Install the vanity drawers.
Apply silicon beads between
washbasin and the wall.
Remove the plate.
Level the vanity drawer by
adjusting two screws.
Adjsut the back of the drawer.
