DURAVIT DuraSystem WD4001 000 000, Инструкция по монтажу

Страница: 5 / 40

en
Mounting instructions information
The mounting instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
The bidet frame may only be installed by a qualified
plumber.
Explanation of the symbols
Link to the mounting instructions in this section
Link to other instructions
> Action required
Safety instructions
Product and/or property damage
The breach of local and country-specific regulations
and standards can cause damage to the product and/or
property damage.
> Observe the local installation regulations and any
country-specific standards at all times.
Prior to the installation
> Check the load-bearing capacity of the wall.
> Please read the pre-installation data sheets. These are
available to download on the Internet at
www.pro.duravit.com.
1000
294-344
400
X
X
96-152
The bidet frame must be adjusted to a ceramic height
of 400 mm. If the upper edge of the ceramic should be
suspended higher, the feet of the frame must be adjusted
accordingly prior to the installation.
Mounting instructions
7
+
13
+
18
+
20
+
21a
+
21b
Observing the fixing and connection dimensions
> Set the water and waste water connections and
fixings according to the ceramic technical drawing.
23
Connecting the water and waste water
The connections for the water and waste water must
be connected to the domestic water installation.
> Observe the local installation regulations and any
country-specific standards at all times.
27
Observing the load-bearing capacity of the wall
> Please read the pre-installation data sheets.
Important information
MAL_57137/17.12.1
5