10
Pre-installation_Product Information
Whirl-SystemsProductInformation
Sundeck
Back
# 710066, # 710128
# 710127
Whirl-Pump
Blower
ControlPanel
SuctionScreen
recommendedequipmentcovers
Please note that in case of cominating tubs and whirlsystems, single components may reach over the rim of the tub. Therefore, we suggest installation into a bathtub case.
Back
# 710127
Back
# 710066, # 710128
PositioningoftheControlPanelonthepillar:
Furniturepanellingforfreestandingversion,cornerrightand
back-to-wallversion:
Directions are as seen from the perspective of a person in the
tub. In the standard configuration, the right hand always ope-
rates the Control Panel (see Fig. 1).
Custom version on request. In this case, a sketch showing
the desired layout is required. Duravit will check and confirm
whether the desired location is possible.
Furniturepanelforcornerleft:
Directions are as seen from the perspective of a person in the
tub. In the standard configuration, the left hand always operates
the Control Panel (see Fig. 2).
Custom version on request. In this case, a sketch showing
the desired layout is required. Duravit will check and confirm
whether the desired location is possible.
Numberofcontrolpanelsonthepillar:
The number of control panels is determined by the system and
the additional modules selected.
Drillholesfortapsintheconsole:
On request, drill holes can be made at the factory for base plates
for rim-mounted tap fittings. Please state the desired base plate
when ordering. Duravit can supply a list of suitable pre-punched
sets on request.
Fig. 1 Freestanding version, corner
right, and back-to-wall version
Fig. 2 Corner left
Back
Legend
