14
PF Conveyors | Installation, Operation & Maintenance Manual
u
Daily Cleaning
/ Dnevno čišćenje
START
STOP
RESET
EN
1
<STOP> the conveyor (
).
2
Remove the clear plastic
guards by twisting the nuts
to the vertical position and sliding
them off of the conveyor.
3
Spray the rag with the diluted
cleaning solution.
4
Wipe the visible portion of
the belt.
CR Zaustavite transportnu traku
Uklonite štitnike uvrtanjem matica u
okomiti položaj i sklizanjem s trans-
portne trake
Poprskajte krpu razrijeđenom otopi-
nom za čišćenje
Obrišite vidljivi dio remena
EN
5
Pull the pins from both sides
of the conveyor’s tail.
6
Lift the tail pulley.
7
Manually advance the belt to
reveal the opposite side .
8
Wipe the visible portion of
the belt.
CR Povucite igle s obje strane „repa“
transportne trake
Podignite repnu remenicu
Ručno pomaknite pojas kako biste
otkrili suprotnu stranu
Obrišite vidljivi dio pojasa
4 veces
EN
9
Repeat
steps 8 & 9
four
times until the entire belt
is clean.
10
Spray the rag with the
diluted cleaning solution.
11
Wipe the entire length of
the frame underneath the
conveyor belt.
12
Wipe under the entire
length of the conveyor.
CR Ponovite korake 8 i 9 četiri puta dok
se cijeli remen ne očisti
Poprskajte krpu razrijeđenom otopi-
nom za čišćenje
Obrišite cijelu dužinu okvira ispod
transportne trake
Obrišite ispod cijele dužine
transportne trake
