MK4A FLOOR
14
Step 4:
Nail in each Floor Board, two 50mm nails in each
end and two into Joists. Measure and cut Floor
Flashing (A110) to fit in between Door Jamb Flash-
ings and nail in place using 50mm Clouts.
Step 1:
Attach
“
T
”
locking handle with two 8x10mm
screws TO R/H door (Door without the weather
-
strip). Slide hook onto square shaft and secure
with a lock washer.
Hook
Lock Washer
Step 2:
Once doors are hung, position the Locking
Stays so they slide into the Locking Brackets
easily. Screw Locking Stays to Door Jamb.
SECURITY DOOR (Optional)
Step 3:
On the back of the left hand door,
position latch so that the hook on
the door handle will be secure and
go in and out easily. Rivet in place
with four rivets.
Left Hand Door
Right Hand Door
Hook
Latch
