INTRODUCTION ................................................................2
IMPORTANT SAFETY PRECAUTIONS ............................2
HELPFUL HINTS ...............................................................2
STRESS TECH PARTS......................................................2
REPAIR SERVICE .............................................................3
SPECIFICATION AND DESCRIPTION CHANGES ..........3
FINISHING THE MICRO STREET FORCE .......................3
RUNNING THE MICRO STREET FORCE.........................4
CHANGING WHEEL TRACK (WIDTH)..............................5
CHANGING WHEELBASE (LENGTH) ..............................5
ASSEMBLY GUIDE ...........................................................7
MAINTENANCE TIPS ......................................................19
Thank you for purchasing the DuraTrax Micro Street Force.
This manual contains the instruction you need to build,
operate and maintain your new electric R/C vehicle. Read
over this manual thoroughly before building or operating the
Micro Street Force.
When the safety precautions are followed, the Micro Street
Force will provide years of enjoyment. Use care and good
sense at all times when operating this radio controlled
vehicle. Failure to use this vehicle in a safe, sensible manner
can result in injury or damage to property.You and you alone
must insure that the instructions are carefully followed and
all safety precautions are obeyed.
•
Do not operate the Micro Street Force near people.
Spectators should be behind the driver or at a safe
distance away from the vehicle.
•
Make sure to read the instructions before charging
the battery.
•
Do not leave the charger unattended during charging. If
the battery or charger become hot at any time disconnect
the battery from the charger immediately! Failure to do
so may cause permanent damage to the charger and
battery and may cause bodily harm.
•
Do not cover the charger during charging. This may
cause the charger to overheat.
•
Do not allow the electronic speed control (ESC) or radio
equipment to come into contact with moisture. Water
can cause the electronics to short out and cause
permanent damage.
•
Always turn on the transmitter before turning on the
electronic speed control.
•
Before turning on your radio, check to make sure that no
one else is running on the same frequency as your Micro
Street Force.
•
Avoid working over a deep pile carpet. If you drop a small
part or screw, it will be difficult to find.
•
Place a mat or towel over your work surface.This will prevent
parts from rolling off and will protect the work surface.
•
Test fit all parts before attaching them permanently.
We have engineered the Micro Street Force to take the
rough and tumble abuse that makes R/C fun. We are so
confident of the quality and durability of the Stress-Tech
plastic parts that we will replace any Stress-Tech plastic part
you break during the first 12 months you own the vehicle.
Just send in the part to us and we will send you a FREE
replacement. Please see the Micro Street Force parts list for
the items covered under the Stress-Tech guarantee.
To receive your free replacement part please send the
following to the Hobby Services address listed on the front
cover of this manual.
❏
1. The broken part must be included.
❏
2. The part number and description of the broken part.
❏
3. Dated copy of your invoice or purchase receipt.
❏
4. Your name, phone number and shipping address.
STRESS-TECH
™
PARTS GUARANTEE
HELPFUL HINTS
SAFETY PRECAUTIONS
INTRODUCTION
TABLE OF CONTENTS
2
Содержание Micro street force RTR
Страница 16: ...16 A B 6 A 2x6mm S T Screw 6 B 2x8mm S T Screw...
