Duratech TC-15, Инструкция по эксплуатации и справочник по запасным частям

Страница: 27 / 124

19
T C - 1 5 T R E E C H I P P E R O P E R A T I N G I N S T R U C T I O N S
Section 3: Operation
To insure long life and economical operation, we highly recommend the operator of the TC-15 TREE CHIPPER be
thoroughly instructed in the maintenance and operation of the machine. There is no substitute for a sound preventative
maintenance program and a well trained operator.
Prior to starting the engine of the TC-15 TREE CHIPPER, we recommend the operator make a visual inspection of the
unit. This can be done as the lubrication is being carried out. Any items that are worn, broken, missing, or needing
adjustment must be serviced accordingly before operating the TC-15 TREE CHIPPER.
3.1 Pre-starting inspection instructions
Check the following:
• Hydraulic components for leaks or damages
Warning: Hydraulic fluid escaping under pressure can be invisible and have enough force to
penetrate the skin. When searching for a suspected leak, use a piece of wood or cardboard rather than
your hands. If injured, seek medical attention immediately to prevent serious infection or reaction.
• Check for loose bolts, worn or broken parts.
• Lug nuts for tightness.
• Condition of tire rims.
• Installation and condition of shields.
• Condition of decals.
3.2 Normal shut down procedure
Use this procedure before servicing, cleaning, inspecting, or transporting the TC-15 TREE CHIPPER.
Use a variation of this procedure only when instructed to so within this manual, or if an emergency requires it.
1. Reduce engine speed to idle.
Important: Whenever practical and consistent with good safety practices, allow the engine to run
without being under load for a few minutes before shutting it off. This allows the engine temperature
to decrease and equalize, which will increase engine life.
2. Disengage clutch.
Warning: The chipper disc will continue to turn for a short time after clutch has been
disengaged.