Duratech TC-15, Инструкция по эксплуатации и справочник по запасным частям

Страница: 19 / 124

11
T C - 1 5 T R E E C H I P P E R O P E R A T I N G I N S T R U C T I O N S
• Feed forward will not operate if the safety bumpers bars are not properly functioning. Consult your dealer
if feed forward does not work after pressing reset.
• After the safety bumper bars are pressed the feed forward switch will not work until the reset on the
engine control panel is pressed. Feed reverse will still function after the safety bumper is activated.
• Never reach into the infeed hopper area. The feedwheels are designed to pull trees and shrubs into the
machine and could easily pull a person or extremities through much easier.
• Always stand to the side of the infeed hopper when inserting material. This allows you to turn away from
the wood, and walk away, without passing through the material. (Figure 1.2)
Figure 1.1
Safety Bumper Bar
Safety bumper bar
Figure 1.2
Proper position for
feeding material into
the hopper