DuraTech Industries Haybuster GP-50 Скачать руководство пользователя страница 24

Страница: 24 / 146

G P - 5 0 G R A I N P R O C E S S O R

O P E R A T I N G I N S T R U C T I O N S

DURING OPERATION

1. Enforce the following safety precautions to prevent serious personal injury.

•

Keep everyone clear of work area except operator seated at tractor controls.

•

Never work on or near processor unless engine is off, and all motion has stopped.

•

Disengage PTO before starting engine.

2. Power take off shafts must be locked in place with protective PTO shields in place.

3. Keep hands, feet, and clothing away from power driven parts.

4. Keep shields in place and in good condition.

5. Watch out for and avoid any object that might interfere with the proper operation of the machine.

6. Loose clothing, necklaces, and similar items are more easily caught in moving parts. Avoid the use of

these items and keep long hair confined.

NORMAL SHUTDOWN PROCEDURE

WARNING:

For your safety and the safety of others, you must use the following normal shutdown

procedure before leaving the controls unattended for any reason, including servicing, cleaning, or

inspecting. A variation of the following procedure may be used if so instructed within this manual or

if an extreme emergency requires it.

1. Run GP-50 Grain Processor until discharge conveyor is empty, and grind as much of the material in the

hopper as possible.

2. Reduce engine speed to idle.

3. Disengage PTO

4. Disengage hydraulics.

5. Place transmission in park and set parking brake.

6. Shut off tractor engine and remove key.

7. Wait for all movement to stop.

8. Disconnect PTO driveline from tractor.

Содержание Haybuster GP-50



















































































































































Результаты поиска

Содержание Haybuster GP-50

Отзывы:

Похожие инструкции для Haybuster GP-50

Бренды по названию

Популярные бренды

DuraTech Industries Haybuster GP-50, Инструкция по эксплуатации и справочник по запасным частям

Результаты поиска

Содержание Haybuster GP-50

Отзывы:

Похожие инструкции для Haybuster GP-50

Бренды по названию

Популярные бренды