DuraTech Industries HAYBUSTER CMF-700 Скачать руководство пользователя страница 49

Страница: 49 / 233

C M F - 7 0 0

O P E R A T I N G I N S T R U C T I O N S

Section 7: Maintenance

7.1

Welding Procedure

CMF‑700 welding procedures for machines with a weight scale

Precautions are required for welding on machines with electronic components. Electronic components including but not

limited to: electronic scales.

Proper welding procedures are necessary with in order to avoid damage to the components, their sensors, and associated

components.

When possible, remove the parts to be welded from the machine.

If not possible to remove the parts, follow the following procedure:

Note:

Do not ground the welder to electrical components listed above, sensors, or wiring. Improper

grounding can also damage bearings of hydraulic components. Clamp the ground cable from the

welder to the part that will be welded. Place the clamp as close as possible to the weld. This will help

reduce the possibility of damage.

1. Unhitch the CMF‑700 from the tractor.

2. Disconnect the connectors from the electronic scale. Move the connectors to a position that will not allow

the connectors to accidentally move back and make contact with any of the pins.

3. Connect the welding ground cable directly to the part that will be welded. Place the ground cable as close

as possible to the weld in order to reduce the possibility of welding current damage to bearings, hydraulic

components, and electrical components.

Note:

If the electrical/electronic components are used as a ground for the welder, or electrical/

electronic components are located between the welder ground and the weld, current flow from the

welder could damage the components.

4. Protect the wiring harnesses and hydraulic lines from welding debris and spatter.

5. Use standard techniques to weld the materials.

Содержание HAYBUSTER CMF-700










































































































































































































































Результаты поиска

Содержание HAYBUSTER CMF-700

Отзывы:

Похожие инструкции для HAYBUSTER CMF-700

Бренды по названию

Популярные бренды

DuraTech Industries HAYBUSTER CMF-700, Инструкция по эксплуатации и справочник по запасным частям

Результаты поиска

Содержание HAYBUSTER CMF-700

Отзывы:

Похожие инструкции для HAYBUSTER CMF-700

Бренды по названию

Популярные бренды