![DuraMax LGH Скачать руководство пользователя страница 93](http://html.mh-extra.com/html/duramax/lgh/lgh_manual_2541215093.webp)
Black plate (13,1)
DURAMAX Diesel Engine (LML/LGH) - 2011
Vehicle Care
10-13
Hot Check Procedure
The fluid must be hot to ensure an
accurate check. The fluid level rises
as temperature increases.
1. Operate the transmission in
D (Drive) until the normal
operating temperature of
71°C (160°F) to 93°C (200°F)
is reached.
2. Pull out the dipstick and wipe it
with a clean rag or paper towel.
3. Push it back in all the way, wait
three seconds and then pull it
back out again. Repeat the
check procedure to verify the
reading.
4. Safe operating level is within the
HOT RUN band on the dipstick.
The width of the HOT RUN band
represents approximately
1.0 liter (1.06 quart) of fluid at
normal operating temperature.
5. If the fluid level is not within the
HOT RUN band, add or drain
fluid as necessary to bring the
fluid level to within the HOT
RUN band.
6. If the fluid level is in the
acceptable range, push the
dipstick back in all the way.
Consistency of Readings
Always check the fluid level at least
twice using the procedures
described previously. Consistency is
important to maintaining proper fluid
level. If inconsistent readings
persist, check the transmission
breather to be sure it is clean and
unclogged. If readings are still
inconsistent, contact the dealer.
All manuals and user guides at all-guides.com