A. Foundation
7
1.
Use pressure treated wood studs
2 x 4 (Actual
size 2” x 3 1/2”, 50mm x 88.9mm)
to create a
platform frame that has an outside dimension of
65” x 96” (1651mm x 2438.4mm)
.
DuraMax must be installed on a level wooden
platform or a level concrete foundation.
2.
Using exterior grade
CDX 3/4”
(19mm)
plywood,
cut and fit together the sheets to form solid foundation
as shown. Foundation must be square and level.
The following are the list of lumber and sizes
you will need.
Wooden Platform
(Not Included)
Pressure Treated - Wood Studs:
4ea 2” x 3 1/2” x 89” (50mm x 88.9mm x 2260.6 mm)
2ea 2” x 3 1/2” x 65” (50mm x 88.9mm x 1651 mm)
Exterior Grade (CDX) - 3/4” (19mm) plywood
1ea 3/4” x 48” x 96” (19mm x 1219.2mm x 2438.4mm)
1ea 3/4” x 17” x 96” (19mm x 431.8mm x 2438.4mm)
L-Brackets:
4ea
The shed must be constructed on a solid base
foundation
. A concrete pad or a large size concrete
patio stone squares is recommended for suitable
floor base. Make sure it is firm and level and will
allow drainage away from the site.
The base foundation should be at least 4
inches(100mm)larger than the shed dimensions.
Please refer to the front page of your owner’s manual
for the exterior dimensions of the shed.
Manufacturer is not responsible for the choice
and construction of the foundation
Concrete Platform
Note
For a concrete pad base, prepare a level bed for
a firm footing layer of crushed stone. The concrete
pad should then be poured to a thickness of 4
inches (100mm) to 5 inches (125mm). Allow to dry
thoroughly for at least 48 hours
If the shed is assembled with
wooden foundation on soil, use the
soil anchor kit.
Note
Lay 2 x 4
(Actual size 2”x 3 1/2”, 50mm x 88.9mm)
Note
50
mm (2”)
88.9
mm (3 1/2”)
Note : If you have DURAMAX Foundation, please follow instruction manual
in that package. If not, follow below wooden platform instruction.
65”
1651mm.
L- BRACKET
24 1/2”
622.3mm.
23 1/2”
596.9mm.
17”
431.8mm.
96”
2438.4mm.
48”
1219.2mm.
17”
431.8mm.
96”
2438.4mm.
Содержание 8 Ft WoodSide
