background image

Duramax Garden Shed

Limited Fifteen Year Warranty

U.S. Polymer Inc. will send a replacement part free of charge, in the event of material defects and or 

workmanship for a period of fifteen years from the date of purchase.

This warranty is extended only to the original purchaser.  A purchase receipt or other proof of date of 

original purchase will be required before warranty service is rendered.  In no event shall we pay the 

cost of flooring, labor, installation or any other costs related thereto.

This warranty only covers failures due to defects in material or workmanship which occurs during normal 

use and does not extend to color change arising due to normal weathering or to damage resulting from 

misuse or neglect, commercial use, failure to follow assembly instructions and the owner’s manual 

(including proper anchoring of the shed), painting, forces of nature and other causes which is beyond 

our control.

Claims under this warranty must be made within the warranty period by calling 1-800-483-4674 or mail 

in a dated sales slip and clear photograph of the part to:

U.S. Polymers, Inc.

1057 S. Vail Ave, 

Montebello, CA 90640.

We reserve the right to discontinue or change components.  If a component has been discontinued 

or is not available,

U.S. Polymers, Inc. reserves the right to substitute a component of equal quality as may be compatible.

Limits and Exclusions

There are no express warranties except as listed above.  The warrantor shall not be liable for incidental 

or consequential damages resulting from the use of this product, or arising out of any breach of this 

warranty.  All express warranties are limited to the warranty period set forth above .  Some states do 

not allow the exclusion or limitation on how long an implied warranty lasts, so the above limitations may 

not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state 

to state or country to country.

1

Содержание 8 Ft WoodSide








































Отзывы: