• 10 •
USING THE RING CONNECTORS
1. To permanently attach to a battery, loosen and remove each nut from the bolt
at the battery terminal.
2. Connect the red POSITIVE connector ring to the POSITIVE battery terminal.
3. Connect the black NEGATIVE connector ring to the NEGATIVE battery terminal.
4. Replace and tighten the nuts to secure.
5. Connect the cable to the end of the charger output cord.
Take care to keep the wires and plug away from metal and moving parts.
6. Connect the charger to a live grounded 120V AC outlet.
BATTERY CHARGING TIMES
APPLICATION
BATTERY
SIZE
CHARGING TIME (hours)
2A 6A 8A 10A
POWERSPORTS
6 Ah
32Ah
6 2 1.5 1.5
15
5 4.5 4
AUTOMOTIVE
300 CCA
1000 CCA
12 4 3.5 3
30 10 8 7
MARINE
50 Ah
105 Ah
15 5 4 3.5
32 11 10 8
Times are based on a 50% discharged battery and may change,
depending on age and condition of battery.
AUTOMATIC CHARGING MODE
When an Automatic Charge is performed, the charger switches to the maintain
mode automatically after the battery is charged.
ABORTED CHARGE
If charging cannot be completed normally, charging will abort. When charging
aborts, the charger’s output is shut off. The BAD BATTERY
(red) LED will
light and the yellow/orange (CHARGING) LED will flash. Do not continue
attempting to charge this battery. Check the battery and replace, if necessary.
DESULFATION MODE
Desulfation could take 8 to 10 hours. If desulfation fails, charging will abort. The
BAD BATTERY
(red) LED will light and the yellow/orange (CHARGING)
LED will flash.
