Durafly T-28 TROJAN, Инструкция по эксплуатации, Страница: 10 / 20

Ailerons and Flaps
Elevator
Rudder
Elevator
10-20mm
10-20mm
10-18mm
10-18mm
50-60mm
12-18mm
12-18mm
Aileron
Rudder
3. The T-28 Trojan handles very well in flight warbird high speed handling, trainer-like low speed.
Before you fly your T-28 Trojan please follow the recommended settings below for optimum
handling and performance..
*Elevator ‘low rates’ 10mm ‘high rates’ 20mm in either direction from neutral.
*Rudder ‘low rates’ 10mm ‘high rates’ 18mm in either direction from neutral.
*Aileron ‘low rates’ 12mm ‘high rates’ 18mm in either direction from neutral
.
SETTING UP YOUR MODEL:
1. With your receiver installed and all servos plugged into their corresponding channels, connect
the flight battery to the ESC to power up the electronics. With the model now armed, ensure all
servos are centered and all control surfaces are level. If not, adjust by turning the control clevises
by hand accordingly until the control surfaces are level as shown.
Note: For safety reasons, it is advised that this is done with the prop removed from the
model.
Control throws:
7