Durafly Retro Series Junior models Plug and Fly, Инструкция по эксплуатации, Страница: 9 / 20

With the model turned over and the battery
access hatch open, connect all servo wires in
the order stipulated by your receiver
manufacturer. A Hobbyking OrangeRx R615
is shown and recommended. Then install your receiver in the moulded
pocket under the servo's by pushing it
rewards as shown. (OrangeRx R615 shown).
Model assembly is now complete. Now
perform a final check on all crews/bolts
etc, ensuring that all are secure and
firmly in place.
- To install your battery simply insert as shown here (NanoTech 1300mah 3S lipo recommended and
shown). Note: Only fully insert your battery in the model when you are out flying. And remember, never
power your model up without the transmitter turn on first.
Assembly
Battery installation (for flight)
12. 13.
EN FR GER
JUNIOR
9