Durafly Retro Series Junior models Plug and Fly, Инструкция по эксплуатации, Страница: 3 / 20

Introduction
Specification
Thank you for purchasing this Durafly Retro series 'Junior' model. The Junior is the world's first truly 'Plug
and Fly' model that is based on a classic 'Vintage' design of yesteryear. While a classic design, this model
comes with all the benefits and convenience of a modern day electric powered EPO model. The Junior
perfectly captures the essence of Vintage flight and design. With its charismatic outline, beautifully simulated
'built up construction' and classic finish. However, unlike traditional built up models, construction time has
been reduced to an absolute minimum thanks to the Plug and fly nature of the Junior.
This retro series model, like the Pioneer before it, comes with all electronics, control horns and push rods
pre-installed and all components pre-assembled. No glue is provided, as none is needed! The Junior simply
screws/bolts together with great ease and simplicity, being ready for flight in a very short space of time due to
its low part count. Even the undercarriage comes pre-assembled for you. The wing is easily removable for
transport and the battery and electronics are easily accessible too through the high quality plastic moulded
battery hatch.
With the Retro series Junior, you'll be rewarded with an extremely relaxing model to both build and fly, with
all the levels of quality and value you've come to love from a Durafly model. Look out for more 'Retro' series
models coming soon from Durafly.
Wingspan: 1100 mm /43.3 in.
Length: 765 mm / 30.1 in.
Weight: 695 g / 24.5 oz
Propeller
：
8x6(Two blade propeller)
Servo’s: 4 x 9g (included)
Recommended radio system: 4CH
Battery: 11.1V, 1300 mAh Li-Po
ESC: 20A Brushless (included)
Motor: DST-1100 (included)
EN FR GER
JUNIOR
3