6
Please keep these owner’s manual for future reference.
If you have opened the carton and removed all packages, please disregard and
SEP 1 and 2.see the STEP 3 directly.
STEP1.
(1)
Open the carton and turn it upside down, make sure
the 4 pieces of carton open us as.
(2)
Lift of the carton carefully and be wary of accessories
inside falling away.
(3)
Take all the packing materials away except for the
paper honeycomb board
rounding top of the fireplace.
STEP2.
(1)
Turn the fireplace heads up on a flat
ground.
(2)
Removed all the paper honeycomb board
rounding top of the fireplace.
STEP 3.
1.
Check each part before use the product.
Make sure the gas supply system is
turned “OFF” before assembling,
see
Figure A.
2.
Put the gas tank in the metal tank seat.
Make sure the tank sits on the metal seat
completely. Turn the win screw on the out
part of metal seat clockwise to secure
the tank tightly. See
Figure D.
3.
Locate the battery, remove the plastic
cover the first. Unscrew the rubber cap
of the Electric ignitor, place a AAA battery
Into battery case. Make sure the positive
pole (“+”) towards the cap. Screw the cap back
to the battery case tightly. See
Figure B.
4.
Place the lava rock averagely in the Fire
Pit on the top of fire pit. See
Figure C.
DO NOT COVER THE IGNITION SCREEN.
When place the lava rock into the fire pit,
Always keep ignition SCREEN visible.
SEPT 4.
Connect the Pressure-Regulating valve to the
gas tank. See
Figure E.
1.
Turn the cylinder valve clockwise to the
The gas supply on the gas tan.
2.
Screw regulator Coupling clockwise by hand
Only. Make sure it is fastened.
ASSEMBLY INSTRUCTIONS
Содержание Carlsbad DFP-ND02
Страница 9: ...9...
