• Select a firm, level, flat
location — at least six
inches from any wall for
proper air flow and conve-
nient to an electrical outlet.
• Place the humidifier on
a water-resistant surface,
as water can damage fur-
niture and some flooring.
Duracraft will not accept
responsibility for property
damage caused by water
spillage.
• We recommend that the
humidifier be disinfected
prior to first use.
Please see CLEANING
instructions.
• Remove the No Drip™
water tank by grasping the
handle and pulling straight
up (Figure 1).
• Turn the water tank
upside-down so that the fill
cap is facing up; unscrew
the fill cap by turning it
counter-clockwise and set
aside.
• Fill the tank with COOL
tap water (Figure 2). DO
NOT USE HOT WATER.
Distilled water is not neces-
sary as the water is puri-
fied by the heating ele-
ment.
• Replace the fill cap by
turning it clockwise. DO
NOT OVER TIGHTEN.
NOTE: WHEN CARRYING
THE FILLED WATER TANK,
PLEASE USE THE HANDLES
ON THE TOP AND
BOTTOM OF THE TANK
FOR ADDITIONAL
SUPPORT.
• Turn water tank right-
side up.
• Position water tank into
the humidifier and push it
into place.
• Some water will empty
into the reservoir base
when the filled water tank
is properly positioned.
• Once the filled tank has
been positioned, do not
attempt to move the humid-
ifier. If it has to be moved,
unplug the humidifier and
remove the water tank first.
NOTE: DO NOT POUR
WATER INTO THE GRILL
ON THE TOP OF THE
HUMIDIFIER. DOING SO
MAY DAMAGE THE
HUMIDIFIER OR CAUSE
PERSONAL INJURY.
S E T
U P
R E S T A
R T
OFF
HIGH
LOW
HUMIDITY
LEVEL
DESIRED
HUMIDITY
REFILL &
RESTART
POWER
Fig. 1
DH-911/
DH-912
F I L L
I N G
➡
Fig. 2
