O P E R A
T I O N
NOTE: DO NOT POUR
WATER INTO THE GRILL
ON THE FRONT OF THE
MOTOR HOUSING. DOING
SO MAY DAMAGE THE
HUMIDIFIER OR CAUSE
PERSONAL INJURY.
• With the power switch
in the OFF position, plug
the filled humidifier into
a polarized 120V outlet.
DO NOT FORCE THE
POLARIZED PLUG INTO
THE OUTLET
; it will only
fit one way.
CAUTION: DO NOT PLUG
IN THE HUMIDIFIER WITH
WET HANDS AS AN
ELECTRIC SHOCK
COULD OCCUR.
M O D E L D H - 8 3 6
• Set the Moisture Output
control to the desired
position:
– HIGH for fast humidify-
ing or NORMAL for
quieter operation.
• The length of time your
humidifier runs will vary
depending on the quality
of construction and
insulation of your room
or house, as well as the
Moisture Output speed.
• Turn the humidifier off if
the humidity level feels too
moist or you notice con-
densation forming on
walls or windows.
• ALWAYS be sure to
discard any unused water
in the tray each time you
refill the Water Tank4 or
finish using the humidifier
(Fig. 4).
M O D E L D H - 8 3 7
• Turn the Humidistat to
HIGH - the darkest, largest
raindrop.
• Set the Moisture Output
control to the desired
position:
– HIGH for fast humidify-
ing or NORMAL for
quieter operation.
NOTE: IF THE HUMIDIFIER
FAN WILL NOT START OR
RESTART WHEN YOU
SELECT A FAN SPEED, THE
HUMIDISTAT MAY BE SET
TOO LOW. MOVING THE
HUMIDITY LEVEL KNOB
TO A HIGHER SETTING
SHOULD RESTART THE FAN.
• When a comfortable
humidity level is reached,
lower the Humidistat set-
ting slowly until the fan
stops. The DESIRED
HUMIDITY light will illumi-
nate, indicating that the
desired humidity setting
has been reached. The
Humidistat will automati-
cally restart the fan each
time the humidity level
falls below this setting.
This “ON/OFF” cycle will
continue periodically while
the humidifier is in use.
• ALWAYS be sure to
discard any unused water
in the tray each time you
refill the Water Tank4 or
finish using the humidifier
(Fig. 4).
➡
FIG. 4
