• Select a firm, level
location—at least six
inches from any wall for
proper air flow and conve-
nient to an electrical outlet.
• Place the humidifier on
a water-resistant surface,
as water can damage
furniture and some
flooring.
Duracraft will not
accept responsibility for
property damage caused
by water spillage
.
• We recommend that the
humidifier be disinfected
prior to first use. Please
see CLEANING instruc-
tions.
• Remove
the water
tank by
grasping
handle
and
pulling
straight
up. Set aside (Fig. 1).
• Open front panel of
motor housing. Remove
the Natural Cool
Moisture
™
filter from
the reservoir base before
filling (Fig. 2). Run it
under cold water; this will
help
reduce
residue
build-
up.
Turn the
filter
upside
down
before
reposi-
tioning
it in the
humidifier. To help extend
the life of your filter,
repeat this step every time
you fill your humidifier.
• Turn the Water Tank
upside-down so that
the fill cap is facing up;
unscrew the fill cap by
turning it counter-clock-
wise and set aside.
• Fill the Water Tank with
COOL tap water (Fig. 3).
Distilled water is not
necessary as the water
is filtered by the Natural
Cool Moisture
™
filter.
DO NOT USE HOT WATER.
• Replace the fill cap by
turning it clockwise. DO
NOT OVER TIGHTEN.
NOTE: WHEN CARRYING
THE FILLED WATER TANK,
PLEASE USE THE HANDLE
AND PLACE YOUR OTHER
HAND UNDER THE TANK
FOR ADDITIONAL SUPPORT.
• Turn Water Tank right-
side up.
• Position Water Tank in
the humidifier and push
it into place.
• Some water will empty
into the Reservoir Base
when the filled Water
Tank is properly posi-
tioned.
• Once the filled tank
has been positioned, do
not attempt to move the
humidifier. If it has to be
moved, unplug the humidi-
fier and remove the Water
Tank first.
S E T
U P
➡➡
➡
FIG. 1
FIG. 2
FIG. 3
➡
F I L L
I N G
