Duracraft CZ-700E, Инструкция пользователя

Страница: 6 / 62

6
ENGLISH
2. If the convector switches off automatically,
switch the power switches (3 + 4) to the
OFF position (5) and disconnect the power
plug (15) from the socket.
3. Allow the convector to cool for at least
20 minutes.
4. If necessary, remove any objects which are
blocking the air intake vents (14) or air
exhaust vents (2) which could have cause
faulty operating or overheating.
5. Resume using the convector as described in
the
„User’s manual“ .
CLEANING AND STORAGE
We recommend you to clean the convector regu-
larly. To avoid so as to avoid impairing the func-
tioning of the convector, please follow the
instructions for cleaning and storage.
Cleaning
1. Before you start cleaning the convector,
switch the power switches (3 + 4) to the
OFF position (5) and disconnect the
appliance from the power supply.
2. Clean the air intake vents (14) and the air
exhaust vents (2) with the brush attachment
of your vacuum cleaner, in order to remove
the dust.
3. Wipe the convector with a soft, damp
cloth.
4. Switch the convector back on as described
in the
„User’s manual“ .
Storage
1. Clean the convector as described under
„Cleaning“ .
2. Store the convector in a cool, dry location.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes
responsibility for the correct use and care of this
convector according to these operating instruc-
tions. The purchaser or user must himself or her-
self decide when and for how long the convec-
tor is to be in operation.
WARNING: IF PROBLEMS ARISE WITH
THIS CONVECTOR, PLEASE OBSERVE THE
INSTRUCTIONS IN THE GUARANTEE
CONDITIONS. DO NOT ATTEMPT TO
OPEN OR REPAIR THE CONVECTOR
YOURSELF, AS THIS COULD LEAD TO
TERMINATION OF THE GUARANTEE AND
CAUSE DAMAGE TO PERSONS AND
PROPERTY.
Technical modifications reserved