-
13
-
SECTION 3 — OPERATION
DISENGAGE PTO WHEN HOIST IS NOT IN USE OR WHEN TRAV-
ELING ON THE HIGHWAY. DO NOT MOVE TRUCK (LOADED OR
UNLOADED) UNLESS THE BODY IS LOWERED AND RESTING ON
TRUCK FRAME.
3.4
HOIST OPERATING INSTRUCTIONS
(For schematic of valve positions, see Figure 4.)
To Raise Body — With PTO engaged (See Section 3.3) and truck engine running at a
speed slightly faster than idle, move valve control in cab to RAISE position (rearward).
To Hold Body — To hold in any position, move valve control in cab to HOLD position. If
body will be held in position any length of time, shift PTO out of gear.
To Lower Body — Disengage PTO (See Section 3.3) and move valve control in cab to
LOWER position (forward).
WHEN TRAVELING ON THE HIGHWAY, THE VALVE CON-
TROL LEVER MUST BE KEPT IN THE HOLD POSITION AT ALL
TIMES, AND THE PTO MUST BE DISENGAGED.
3.5
VEHICLE STORAGE
IN ALL CASES, WHEN TRUCK IS STORED OR NOT IN USE,
THE BODY MUST BE IN THE FULL LOWERED POSITION AND
RESTING ON THE TRUCK CHASSIS OR HOIST FRAME. KEY
SHOULD BE REMOVED FROM IGNITION TO PREVENT TAM-
PERING BY UNAUTHORIZED PERSONNEL.
CAUTION
CAUTION
CAUTION
